|
DESCIRPTION: Ready mixed paste, free of;
chlorinated hydrocarbons, methylene chloride, phenol and other
harmful ingredients. Does not give off narcotic fumes.
USE: It is designed to remove: alkyd,- and oil
based varnishes, acrylic varnishes, polyurethane’s, enamel paint,
dispersion and latex paint
DIRECTIONS: Apply liberally on surface. Remove
after required time with scraper. Intricate and carved sections can
be vigorously brushed with a stiff plastic brush. Apply a further
liberal coat and repeat until bare wood surface is visible. Wash
off any residue with a damp cloth or water. Do not use any metal
abrasives as this will cause rust marks to penetrate the wood
surface. Use sandpaper to remove any small traces of finish, once
the wood has completely dried out.
Veneer timber: Please test always beforehand.
RECOMMENDED STRIPPING TIMES: Note: In extremely hot
temperatures cover the treated area with plastic film.
- Varnish, shellac, French polish: 60-120 minutes
- Lacquers, polyurethane’s: 60-120 minutes
- Multi-layered paint: 60 + minutes
PACKAING: 1 and 4 Litres
PRECAUTION: Avoid contact with skin and eyes. If
contact occurs, rinse well with water. Wear eye protection when
using a brush. Protective gloves recommended for prolonged
exposure
STORAGE: Keep tightly sealed in a cool and dry
place. Do not allow this product to freeze.
DISPOSAL: Do not pour left over paint stripper down the
drain. Unwanted paint stripper should be brushed out on newspaper,
allowed to dry and then disposed of via domestic waste collection.
Let empty container dry out as well and dispose via recycling
program.
The preceding information was prepared by BIO Products Australia
and is given as a general guide only. Some variations may occur or
be advisable for particular conditions. The manufacturer’s
responsibility for claims arising from breach of warranty,
negligence or otherwise is limited to the purchase price of the
material.
BIO PAINT STRIPPER is an environmental friendly product.
1/08/2007
view pdf version
(75k)
| 