|
DESCRIPTION: Penetrating oil for priming all
absorbent interior surfaces, especially new wood, cork and unglazed
stone tiles. Very suitable as a preliminary treatment for waxed,
varnished or oiled finishes. For final oiled finish use Bio Natural
Wood Oil or Bio Teak Oil.
PREPARATION: Do not apply coatings to unseasoned or
wet timber. Wood should be well sanded, dry and cleaned of greasy,
waxy and dirty contaminants using BIO Thinner. Round off sharp
edges. It is also good practice to prime back surfaces.
Hardwoods and timbers rich in natural oils, waxes, acids and
terpenes should be degreased using Bio Thinner, because these
substances may mix with the varnish and prolong its drying time.
Let dry for 24 hours. Imperfect coats may require complete
stripping before applying BIO Products.
APPLICATION: Brush thinly and evenly, working
varnish well into the grain. Do not apply more oil than the surface
can absorb. Maintain a wet edge when painting. Remove excess oil
with a dry lint free cloth after approx. 15-30 minutes. Test the
absorbency of the surface before application: for very absorbent
timber, work in small areas otherwise the oil might dry before you
are able to wipe off the excess, causing an uneven patchy finish.
Low temperature and humid conditions prolong the drying time. Do
not paint below +10C and or above 80% humidity, in cold damp
conditions, when condensation, rain, dew or frost are likely
to occur or hot days, direct sunlight and hot surfaces.
Provide adequate ventilation during application and drying. Reaches
maximum durability after 21 days.
DRYING: Can be sanded after 24 hours, after which
time treatment can continue. However, the oil takes up to 72 hours
to dry completely.
COVERAGE: 1 Litre covers approx. 10-12 sqm. Note:
Coverage varies greatly with the absorbency of the material being
primed. Cross-cut and other open-grained surfaces require
considerably more oil.
CLEANING: Use BIO Thinner.
PACKAGING: 1, 4 and 20 Litres.
INGREDIENTS: Plant oils.
STORAGE: Keep tightly sealed in a cool and dry
place. Surface skin may develop in opened cans.
DISPOSAL: Do not pour left over oil down the drain.
Unwanted oil should be brushed out on newspaper, allowed to dry and
then disposed of via domestic waste collection. Let empty container
dry out as well and dispose via recycling program.
PRECAUTION: Keep away from open flames and out of
the reach of children. Please dispose of used rags in a sealed
metal container. Can spontaneously combust.
The preceding information was prepared by BIO Products Australia
and is given as a general guide only. Some variations may occur or
be advisable for particular conditions. The manufacturer’s
responsibility for claims arising from breach of warranty,
negligence or otherwise is limited to the purchase price of the
material.
BIO PRIMING OIL is an environmentally friendly product.
1/08/2007
BUY NOW from Online
Store
view pdf version (83k) | 