|
DESCRIPTION: A penetrating interior primer based on
natural ingredients, for use with Bio Wall Paint. For use on new
surfaces such as plasterboard, concrete, fibro-cement, plaster and
other absorbent crumbly surfaces.
SURFACE PREPARATIONS: Prepare surface in accordance
to AS 2311 The painting of buildings. Substrate should be dry and
cleaned of greasy and dirty contaminants, and should be solid and
resistant to pressure. Loose particles from crumbly surfaces must
be brushed off. Old coats must be removed.
APPLICATION: Stir thoroughly with a broad flat
stirrer before use. Apply evenly using a brush, roller or
spray. Drying time is 2-6 hours, longer in cold and damp condition.
Do not apply under
12+C.
INGREDIENTS: Water, lemon oil, borax, calcium
carbonate, kaolin, titanium dioxide, cellulose, surfactant, resins,
castor oil, mineral oil, lecithin, tspp.
CLEANING: Immediately after use with soapy
water.
COVERAGE: 1 Litre covers approx. 5-10 sqm depending
on the absorbency of the substrate.
PACKAGING: 1, 4 and 10 Litres.
PRECAUTION: Keep out of reach of children.
STORAGE: Keep tightly sealed in a cool and dry
place.
PAINT DISPOSAL: Do not pour left over paint down
the drain. Unwanted paint should be brushed out on newspaper,
allowed to dry and then disposed of via domestic waste collection.
Let empty container dry out as well and dispose via recycling
program.
The preceding information was prepared by BIO Products Australia
and is given as a general guide only. Some variations may occur or
be advisable for particular conditions. The manufacturer’s
responsibility for claims arising from breach of warranty,
negligence or otherwise is limited to the purchase price of the
material.
BIO Wall Primer is an environmental friendly product.
1/08/2007
BUY NOW from Online
Store
view pdf version
(77k) | 