|
RANGE OF APPLICATIONS: For tinting all LIVOS Brand
Wall & Ceiling Paints and Natural Texture Render.
TECHNICAL QUALITIES: Non-fading. Mixable at any ratio
with DUBRON Natural Dispersion Paint No. 400 and ALBION Natural
Wall & Ceiling Paint No. 407, maximum addition to ALBION
NaturalDispersion Paint No. 404: 10 %; to BELSA Natural Texture
Render No. 462: 5 %. Limitedwipe-ability when used as full-tone
paint.FULL DECLARATION: Water, iron oxide and mineral
pigments, beeswax soap, linseed oil - stand oil, dammar resin,
natural resin ester, orange oil, Isoaliphates, ethanol, silica
acid, methyl cellulose,borax and boric acid.
COLOURS: 005 Sunny yellow; 081 Burnt umbra; 440 Linden
green; 011 Ochre; 101 Black; 441 May green; 020 Terracotta; 111
Green; 442 Golden yellow; 021 Red ochre; 121 Ultramarine blue; 443
Mint turquoise; 041 English red; 211 Cream; 444 Capri blue;
051 Persian red; 445 Blue-violet; 071 Natural umbra; All colours
are inter-mixable. Please note that different surfaces can cause
different colour shades (structure,absorbency). View Colour Chart
COVERAGE: Depending on the application and the desired
colour intensity: Look on the colour charts. As full-tone paint, 1
litre is sufficient for approximately 6 m2 per coat,i.e.
167ml/m2.
CLEAN UP: Clean equipment immediately after use in warm,
soapy water using LATIS Natural Intensive Cleaner No. 551.
DRYING TIME: At 23oC and 50 % relative
humidity, surface may be painted over after 24 hours.
SPECIFIC GRAVITY: Approximately 1.1-1.3 g/ml depending on
the colour.
SIZES: 0.125 ltr*; 0.375 ltr*; 2.5 ltr; 5 ltr. *typical
sizes stocked
STORAGE: Cool, dry and frost free. Please, see label for
expiry date. Storage time is limited once container has been
opened. Cover with cellophane wrap or aluminium foil.
APPLICATION AS A COLOUR PIGMENT for WALL PAINT:
Thoroughly mix the same or twice as much wallpaint to the required
amount of URA Colouring Paste No. 410, then add this mixtureto the
remaining wall paint and stir thoroughly. Using a stirring device
facilitatesan even mixture. Do a test application; final colour
determination only possible aftercomplete drying.
APPLICATION AS A FULL TONE PAINT: Suitable only in areas
where full abrasion resistance is not required. Not suitable for
moist areas such as kitchens and bathrooms. Note that the following
colours; red ochre, english red, natural umber, and black produce
only a glaze; an evencoverage quality is only achieved after 2-3
coats have been applied.
APPLICATION FOR RUSTIC PAINTING: Add 5-10 % SUNNO Glace
Binder No. 451 to URA Colouring Paste. The consistency may be
adjusted with the addition of water. For a white coating, or for
lighteningother colours, DUBRON Natural Wall- and Ceiling Paint No.
400 or ALBIONNatural Wall- and Ceiling Paint No. 407 can be used.
ARDVOS Universal WoodOil No. 266 or shellac products are suitable
for coating the treated surface. Please,do a preliminary test
before applying subsequent coats, as each coating affects
thetreated surface's coloration.
IMPORTANT TIPS: Always stir mixtures thoroughly before
using URA Colouring Paste No. 410. Partial separation (especially
heavy pigments), does not reflect the quality andeffectiveness of
the products coating ability. Alterations in colour resulting from
avariation of the relevant pigments is possible; for this reason,
always purchasecontainers showing the same batch number if
possible.
These directions were prepared by LIVOS and are the result of
long years of research and practical testing. They are backed by
LIVOS’s most current expertinformation. New findings may invalidate
this information. This information sheet is meant to serve as
information and instruction.No legal liability should be
interpreted from it. In case of doubt, please contact the retailer,
wholesaler, or manufacturer.
Nov 2006
BUY NOW from On Line Store
view pdf version (670k)
| 