Application range: For interior and exterior wooden- and
stone surfaces such as tiles, tombstones, walls, and facades. Not
suitable for marble, calcareous stone or other material sensitive
to acid e.g. terrazzo.
Technical qualities: Removes chalk- and cement residue,
moss, algae, stains of fungi, salt deposits on facia boards.
Dissolves oil, fat- and protein soiling, completely or partly,
depending on the surface.
Full declaration: Water, citric acid and Reetha
Dilution: Depending on the density and the amount of
soil, dilute with water at the ratio of 1:10 for cleaning and at
the ratio of 1:5 for after-treatment.
Application method: With a sponge, a spray bottle, or a
high pressure cleaner.
Cleaning: Clean tools immediately after use with plenty
Specific gravity: 1.09 g/ml.
Safety advice: Keep out of the reach of children. Product
reacts acidic. Protect skin and eyes during application. In case of
contact, rinse off with plenty of water. In case of eye contact,
seek medical advice immediately. Non-ionic surfactants: less than
Container sizes: 1.0 l; 10 l; 30 l.
Disposal: According to locally regulated laws.
Storage: Cool and dry. Please see label for expiry
Application: Apply GLOUROS Natural Siding & Masonry
Cleaner No. 1806 with a sponge or a spraying device on the surface
to be treated. Rub the dirt off with a non-abrasive pad (normally
white) or a sponge and flush or rinse with plenty of water.
VARIATION OF USES:
Fungi, moss, algae: Dilute GLOUROS Natural Siding &
Masonry Cleaner No. 1806 with water, at a ratio of 1: 10 and remove
dirt. To protect the surface against new fungi spray again with a
dilution of 1: 5 and allow to dry.
Salt deposits: Before applying GLOURUS No. 1806, the
surface should be watered well. Spray surface on facadeswith a 1:
20 dilution. Rinse off with plenty of water and low pressure.
Metals: Clean light mineral soiling on brass, copper and
stainless steel with a dilution of 1: 5 to 1: 20. Do not rinse off
cleaned stainless steel surfaces. Remove chalk residue on
chromium-plated surfaces at a dilution of 1: 5 and rinse off with
plenty of water.
Wood: Dilute GLOUROS Natural Siding & Masonry Cleaner
No. 1806 with water 1: 10 and spray on the surface, scrub the dirt
with a non-abrasive pad (normally white) or a sponge until all dirt
is removed, then rinse off. Spray the surface with GLOUROS Natural
Siding & Masonry Cleaner No. 1806 diluted 1: 5 and allow to dry
without rinsing. For an after-treatment for external application in
dry, warm weather conditions and after testing the wood moisture
content; use ADAO External Primer No. 259 and KALDET All Weather
Stain No. 281, or any other suitable LIVOS products.
Important tips: The reaction time depends on the density
and the age of the soiling. Always do a test application to check
the surface’s compatibility with GLOUROS Natural Siding &
Masonry No. 1806 and watch the effect.
These directions are the result of long years of research
and practical testing. They are backed by our most current expert
information. New findings may invalidate this information. This
data sheet is meant to serve as information and instruction. No
legal liability should be interpreted from it. In case of doubt,
please contact the retailer, wholesaler, or