Application range: For cleaning dirty and also extremely
calcified toilets and sanitary areas.
Technical qualities: Dries fast without leaving stains.
Dissolves lime and other soiling sensitive to acid. Dissolves urine
stains after a short reaction time. Removes dirt and smell also in
the case of hard water.
Ingredients: Water, citric acid, ethanol, Reetha
(soapnut) extract, polysaccharide and citron oil.
Dilution: Ready to use, no dilution required.
Application method: Apply approximately 15 ml of TAROS
all over the edge of the toilet bowl. Leave to react for a while,
then brush the toilet bowl and flush. In case of heavy soiling
allow to react for a longer time.
VARIATION OF USES:
Specific gravity: Approximately 1.15 g/ml.
Safety advice: Only to be used on toilet bowls. Not
suitable for marble and other acid-sensitive materials. Protect
eyes and skin. In case of eye contact, rinse immediately with
plenty of water. Contains Limonene. The anionic surfactants are
according to the detergent by-law 648/2004, biodegradable.
Non-ionic surfactants: < 5 %
Scents: < 5 %
Disposal: According to locally regulated laws.
Container Sizes: 0.5 l; 2.5 l.
Storage: Cool and dry. Please see label for expiry
Packaging: Made of polyethylene (PE). This material is
ground water neutral and recyclable.
These directions are the result of long years of research
and practical testing. They are backed by our most current expert
information. New findings may invalidate this information. This
data sheet is meant to serve as information and instruction. No
legal liability should be interpreted from it. In case of doubt,
please contact the retailer, wholesaler, or