|
Description: Clear Wax for the maintenance of wood
surfaces.
Coverage: 10 – 20 ml per m², depending on surface
properties.
Colour: Clear, enriches the colour of the wood.
Drying Time: Can be polished after 30 – 45 minutes,
depending on room temperature and relative humidity. Applying too
thick coats will cause a sticky surface.
Range of Application: For the refinement and
water-repelling protection of all interior surfaces, especially
wood, cork and unglazed potter's clay tiles that have been treated
with Volvox Hard Oil. For heavily used surfaces (e. g.
stairs, hallway floors) better use Volvox Preserving
Wax.
Properties: Satin-sheen surface. Very liant due to its
salve-like consistency, therefore easy to apply. Very yielding.
Creates a satin and water-repellent surface but still is fully
pervious to vapour. Excellent wood care properties. Permeates
quickly and can soon be polished. Worn areas can be repaired easily
be re-applying the wax.
Volvox Floor and Furniture Hard Wax is made of
non-poisonous and natural raw materials not endangering the
environment and watercourses. Especially positive effect on the
room climate. It does not cause electrostatic charge.
Due to its ingredients Volvox Floor and Furniture Hard
Wax is extensively harmless for the user and the environment when
used as intended. Volvox Floor and Furniture Hard Wax should
not be applied in temperatures below 15 °C.
Preparation: The surface should be clean, dry, dust and
grease free. Sand wood carefully. Exotic types of wood (e.g teak)
should carefully be degreased with Volvox Alcohol Thinner. Highly
absorbent surfaces should be primed with Volvox Hard Oil or Volvox
Primer first. Cook and cork parquet should be primed with Volvox
Floor Lacquer, Satin Finish, diluted with 20% Isoparaffin, or
Volvox Primer only. Note: as cork resin components may
prolong the drying times a preliminary test of the drying
properties must be done. The priming coat should be done sparingly
and all excess liquid should be removed with a cloth.
Application: Afterwards apply Volvox Floor and
Furniture Hard Wax very thinly. The application may be simplified
be heating the wax (not exceeding 50 °C). Apply with a lint-free
cloth or a buffing machine. When dry polish with a cloth bale or a
polishing brush.
VARIATION OF USES:
Tools: Cloth bale, buffing machine. Clean tools with
Volvox Isoparaffin.
Storage: Store in a cool place. When partly used flatten
the surface of the remaining wax and keep container tightly
sealed.
Ingredients: Bees wax, carnauba wax, candelilla wax,
ceresin waxes, isoparaffin.
Safety: Floor and Furniture Hard Wax is flammable. Even
if non-poisonous keep out of the reach of children.
Disposal: Allow product rests to dry and dispose of
according to the local rules in force.
View pdf
version | 