|
Brief Description: Volvox Floor Oil High Solid is an
extremely hard-wearing, solvent-free substance for the treatment of
wood. It is made from various boiled oils and different sorts of
wax with a solids content proportion of >95 % and is especially
suitable for mechanical treatment. The surface is enriched in
colour and dries to a semi gloss finish. Volvox Floor Oil
High Solid is extremely economical in its consumption.
Coverage: Approximately 20 ml per square metre or ca. 50
m² per litre.
Colour: Clear.
Drying Time: Depending on temperature and relative
humidity: touch dry after about 2 hours, ready for sanding down
after about 24 hours, fully hardened after about a week.
Uses: For the treatment of floors, stairs, worktops and
the like of wood and cork.
Properties: Volvox Floor Oil High Solid is
water-repellent and moisture regulating. It does not cause
electrostatic charge and is quick-drying when applied
mechanically.
Preparation: The surface should be clean, grease-free,
absorbent and dry. The wood should be sanded smooth. If the surface
is highly absorbent (e. g. cork, beech or similar) it is advisable
to first apply Volvox Hard Oil as a primer.
Application: Stir well before use. Apply the product
using a scraper. After that burnish it in mechanically at once. Any
excess oil must be removed immediately. Instead of applying the
product using a scraper you may also put small quantities of it on
the floor and immediately burnish it in mechanically. If after this
treatment the surface gives no uniform impression you should repeat
it after 6 - 24 hours depending on the drying time (a light sanding
is advisable between each coat). Any excess must be removed. As a
final treatment you can apply – after another 24 hours’ drying time
– a layer of Volvox Wax Finish and, when dry, polish it.
VARIATION OF USES:
Note: Oiled and waxed surfaces that are cleaned with micro
fibre cloths need an increased maintenance and must be re-treated
more often if necessary.
Note: For the cleaning and the maintenance the
Volvox Floor Maintenance Set is particularly
suitable.
Tools: Polishing machine, pad, scraper etc. Clean the
tools with Volvox Isoparaffin immediately after use.
Storage: Keep containers tightly sealed and store in a
cool but frost-free place. When a container is opened and the
product partially used-up, fill the rest into a smaller container
in order to avoid flocculation. Keep it tightly sealed.
Ingredients: Linseed oil, linseed stand oil, tung oil,
hardened calcareous resin, boiled tung oil, lead-free drying
agents, silicic acid, beeswax, candellila wax, isoparaffin,
anti-skinning-agent.
Safety: Even if non-poisonous, keep out of the reach of
children. Product is flammable. Do not smoke whilst working and do
not use an unshielded flame. During and after work ensure a good
ventilation of the rooms. Rags soaked with the product are
self-combustible and must be disposed in a sealed metal container
or spread out to dry.
Disposal: Allow unused floor oil to dry; then it can be
disposed by the normal waste disposal.
View pdf
version | 