X
Member Login
User Name:
Password:
Register

Member Login
User Name:
Password:
Register
PO Box 1188
Bega 2550
NSW AU
Tel 02 6100 3889 or 1300 249 347

LIVOS DUBRON Emulsion Paint 414 - Interior

Range of application: For plaster, cement, brick, oatmeal wallpaper, gypsum board, drywall and smooth, painted surfaces, without previous priming. Not suitable for textile or vinyl wallpaper surfaces. Technical qualities White, wipe-able, easy to use, very breathable, anti-static (dust resistant). Solvent free in accordance with ECO German Environmental Labeling System. Does not tend to clump or splash. Coverage meets German Industrial Norm (DIN) 55 987. For color, mix with our URA Coloring Paste No. 410 as desired.

Ingredients: Water, chalk, talcum, natural resins, zinc oxide, bentone, beeswax, methyl cellulose,

beeswax soap, hemp oil, linseed oil, safflower oil, silver chloride, Isoaliphates, orange oil, (as solvent, less than 2%).

Dilution: Ready to use! Do not dilute.

Application method: Apply with a brush, lambskin roller or airless spraying gun at temperatures above 10oC (50oF).

VARIATION OF USES:

Coverage: 1 liter undiluted covers approximately 5 to 6 m². Always depends on surface smoothness, absorbency and thickness of application. Test coat recommended.

Drying time: At 23oC (73.4oF) and 50% relative humidity, approximately 12 hours

Specific gravity: Approximately 1.26 g/ml

Cleaning up: Clean tools immediately with warm water and our TRENA pH-Neutral Cleaner No. 556 or LATIS Natural Intensive Cleaner No. 551.

Disposal: According to locally regulated laws.

Container sizes: 0.75 lt; 2.5 lt; 10 lt

Storage: Cool, dry and frost free. Please see label for expiry date. Use opened container within two or three days.

General surface: Surface must be dry, solid, able to absorb and bear loads, neutral, clean, and free of dust,

Preparation: dirt, grease, cracks, splits and mould and fungi. Fill holes and cracks with VEDO Wall Filler No. 440. Repair construction or structural cracks with crack-bridging repair system. Smooth out before painting. Stir DUBRON well before using. Test coat recommended.

Surface Preparation:

Cement - Remove dust and dirt

Gypsum/lime plaster, - drywall Remove dust and dirt; sand off powder coatings

Concrete - Remove oil residue, dust, dirt

Breeze block - Remove dust and dirt; use filler if necessary

Clay, brick masonry - Remove dust and dirt

Old chalky paint - Brush with a wire brush and remove dust

Old oil, acrylic or latex paint - Roughen surface and remove dust or wash with alkaline and rinse well

Peeling paint or distemper - Remove thoroughly, wash well and let dry

Hardboard - Remove dust, dirt, grease

Wood veneer, chipboard - Remove dust and dirt

Gypsum fibreboard - Check joints for fit and tightness

Oatmeal or other natural wallpaper - Check that glue holds paper to wall (except textile) and re-glue if necessary.

Application: Two very careful coats can completely cover most surfaces, including oatmeal wallpaper. Apply extra coats on very uneven, very smooth and very or inconsistently absorbent surfaces for best results. Application with an airless spray mechanism is especially advantageous on very uneven or very smooth surfaces.

Important notes: Keep out of the reach of children. Stir well before using. If applied too thickly, DUBRON can become chalky when dry. Confirm color/tint once test coat is dry. Ensure good ventilation to speed up drying time.
Warning: Do not mix with tints from other manufacturers.

View pdf version