Range of application: For sealing interior solid timber, such as; furniture, window sills and floors and for OSB – boards. Limited use on veneer and Multiplex. Not
suitable for plywood and other fine fibre glued wood derived material, or cabinet interiors.
Technical qualities: Transparent, high gloss, water resistant finish according to German Industrial Standard DIN 68 861, part 1, open-pored. Produces a protective surface film after
applying 2-3 coats. KUNOS White preserves the natural wood tone on light timber. DIN 53 160 certified for colour fastness when exposed to perspiration and saliva. Also DIN EN 71 part 3 certified as
suitable for toys.
Full declaration: Depending on colour in different proportions: Linseed oil, linseed oil - stand oil - natural resin ester, linseed oil - wood oil - stand oil, highly transparent iron
oxide, titan dioxide, natural resin glycerol ester, linseed oil- stand oil, orange oil, Isoaliphates, silicic acid, micronized wax, pine oil, rosemary oil, drying agents free of lead.
Colours: 002 clear*, 069 tobacco, 089 antique oak, 054 mahogany, 076 oak, 204 white, 062 walnut, 082 rosewood, 064 dark walnut, 088 smoked oak. * Typically stocked by Colours By
Nature; other colours available on order.
Dilution: SVALOS Dilutant No. 222 or BIO Thinner
Application method: Brush or spread with an applicator made of solvent-resistant synthetic or rubber. Spraying,
dipping, using cloth or a lambs-wool applicator or machine application also produce good results. Use at temperatures above 12oC (54oF). Scour gently with a white pad or 240 grit sandpaper or finer between coats. Burnish
on the third coat.
Coverage: First coat: 1 undiluted litre is sufficient for approx. 22 m.Second coat: 1 undiluted litre is sufficient for approx. 88 m.Third coat: 1 undiluted litre is sufficient for
approx. 295 m2.Coverage does depend on surface condition and absorbency. Pre-testing your project is recommended. For spraying, can be thinned to a max. 5 to 10% with either SVALOS
dilution or BIO Thinner.
Cleaning: Clean equipment immediately after use with LEVO Brush Cleaner No. 994, or SVALOS Dilutant, or BIO Thinner.
Drying time: At 23oC (73oF) and 50% relative humidity: First coat 12 hrs, subsequent coats 24 hrs, final degree of hardening is reached after 4 weeks.
Specific gravity: Approximately 0.89 g/ml
Safety advice: Always be sure to store cleaning cloth, polishing pads, sponges, etc. that are still wet or even slightly moist with KUNOS Natural Oil Sealer No. 244 in an airtight
metal container or in water and dispose, as there is a danger of combustion caused by plant oil content in the product. However, the product alone will not undergo spontaneous combustion. Contains
limonene. S 2 Keep out of the reach of children. S 62 If swallowed, do not induce vomiting: Seek medical advise immediately and show the container or label.
Disposal: According to local regulations.
Container sizes: 250ml*; 750ml*; 2.5l*; 10l ; 30l; 200l. * sizes stocked by Colours By Nature
Storage: Cool and dry. Please see label for expiration date. Transfer unused portion of product to a smaller container for storage.
HOW-TO Use on Wood Surfaces
Preparation: Wood must be dry (moisture content below 12 %), solid, able to absorb, clean, free of resin and dust. Brush large-pored woods such as oak, ash, chestnut, elm, mahogany or
teak carefully, to clean pore grooves.Sand furniture gradually up to 240 grain, for oak use 180 grain. Floors gradually up to 180 grain.
Application: Depending on surface requirements and absorbency: Apply 1 to 3 thin coats, until a coating layer has developed. If necessary, and for dipping applications; can be diluted